Wind Turbine Magnets: A Comprehensive Guide with Cases

ind Turbine Magnets: A Really Easy Guide 

Magnets are super important for making wind power! We make the best magnets, called NdFeB magnets. This guide is for you to learn all about them. We'll show you how they work and how we can help you get the perfect ones for your wind turbine!

Table of Contents

Wind Turbine Magnets

What are Wind Turbines? And Why Do They Need Magnets?

Imagine a big fan, but instead of making wind, it uses the wind to make power! That’s a wind turbine!

  • The wind turns the big blades.
  • The blades turn a special part inside called a generator.
  • The generator uses magnets to make electricity!

It’s like magic, but it’s science! The magnets spin around, and that makes the power you use in your home, your farm, your wind-solar hybrid farms, or your city! Permanent magnet generators are key to making this happen.

We are a Neodymium Magnets Factory and are experts on magnets for wind turbines!.

Why Our NdFeB Magnets are the BEST for Wind Turbines

There are different kinds of magnets. But NdFeB magnets (that’s short for Neodymium Iron Boron) are the strongest!

Here’s why you should pick our NdFeB magnets:

What Makes Our Magnets Great?What Does it Mean for You?
Super StrongMore power from even a little wind!
Last a Long TimeYou don’t have to change them often!
Not Too ExpensiveSaves you money in the long run!
Work when it’s warmThermal stability is a MUST!

We make sintered neodymium magnets, the most renewable energy component available. That means they are super good at keeping their magnetic flux density even if its warm. That means consistentcy–you get the best wind turbine efficiency using our magnets! Other, weaker magnets, like Ferrite or Alnico, just can’t do that! SmCo magnets are ok, but expensive. Our NdFeB magnets are the best choice!

Want the strongest? Check out our Customized NdFeB Magnets!

Picking the Right Magnet for Your Wind Turbine

You need to pick the right magnet for the job. It’s like picking the right size shoe!

Here is important stuff to know:

  • Magnet Grade: What is the wind-to-electricity ratio? We have different grades, like N35N42N52, up to different Magnet grading (N35, N52)! The higher the number, the stronger the magnet.  You need to pick one that’s strong enough for your turbine, but not too strongYou want the most cost-per-watt bang for your buck!
  • Working when warm: Wind turbines used Off-grid wind systems and in 12V/24V wind generators can get hot! Some magnets lose their power when they get hot. We add special stuff (like Dysprosium, the Dysprosium additives, mentioned in the big words) to our magnets so they work great in hot locations, even in the sun! You want magnets for offshore wind systemsYou need the best magnet grading!
  • ShapeMagnets can be different shapes. For wind turbines, we usually make them into curved pieces, like slices of a pie! This helps stop power loss (it’s called “eddy current losses” in the big words).
  • Hybrid solar-wind systems: have special needs. Talk to us to make sure you get the right magnets!

We can make custom magnets just for youMagnet Coating is important, and whatever your Magnet Grade needs are, we have you covered. Just tell us what you need!

Real-Life Stories of Our Magnets Helping People

Let’s look at some real stories of how we have magnets out making power.

Story 1: The Big Wind Farm in the Ocean

  • Problem: The wind turbines in the ocean were getting rusty because of the salty water! Offshore corrosion is a real problem.
  • What We Did: We made special NdFeB magnets with a special coating to stop the rust, reducing demagnetization risks. We also make fault-tolerant designs!
  • Result: The wind turbines last much longer, saving money for operators. The wind farm grid integration has never been better!

Story 2: The Small Wind Turbine Helping a Village

  • Problem: A village needed power, but there wasn’t much wind.
  • What We Did: We made specialhigh-coercivity optimization magnets that work great even with a little bit of wind.
  • Result: The village got power for lights and phones, even on calm days! Story 3: Helping on Farms
  • Problem: Farms need to do wind resource mapping.
  • What We did: We used our magnets that have outstanding Magnet coercivity to map wind resources and ensure efficient wind turbine prototyping.
  • Result: Farms know where to put wind turbines to get the best results.!

We are a NdFeB Magnet Factory Making Magnets for Wind Turbines

Its hard to perform wind turbine maintenance, and you need reliable, consistent quality! This is what we offer:

  • Step 1You tell us about your wind turbine. How big is it? How much power do you need? Where will it be?
  • Step 2: We help you pick the best magnet and coating for your turbine.
  • Step 3: Contact us to get a price for your custom magnet order. You save if you buy a lot!
  • Magnet recycling technologies are important to consider.
    • Magnet recycling processes
    • Magnet supplier landscape
    • End-of-life recycling

Why Pick Us?

  • We are a NdFeB Magnets Factory, so you get factory prices!!
  • We only make the best quality magnets. We test them to make sure!
  • We have a 100% Satisfaction guarantee!
  • We ship magnets all over the world.

We are with you through the ENTIRE process, from magnetic assembly techniques, to fault detection systems, and through load testing protocols.

Questions You Might Have

Can I use your magnets to make my old wind turbine better?

Yes! We can make magnets that fit your old turbine. This is wind turbine retrofitting. This is a great way to make more power without buying a whole new turbine!

How long will your magnets last?

Our magnets can last for over 20 years! We do reliability testing! The special coating helps protect them, extending magnet warranty periods.

Do you give discounts if I buy a lot of magnets?

Yes! Contact us, tell us about your project, and we will give you a great price.

Let’s Make Wind Power Together!

NdFeB magnets are the best way to make wind turbines work great. We are the best NdFeB magnet maker. Let’s work together!

Get your Custom Neodymium Magnets made today!


More info

  • We make magnets in all shapes and sizes to meet all geometry requirements.
  • We use finite element analysis (FEA), during our magnetization alignment process.
  • We perform magnet degradation analysis.
  • We can be OEM partnerships.
  • Magnet adhesive bonding is available for your specifications!
  • Magnets are very strong!
  • Learn more about magnet grade options.
  • We use powder metallurgymagnet sintering process.
  • We make sure to use sustainable material sourcing, and follow supply chain ethics.
  • Axial flux generators
  • Lamination materials
  • Low-RPM generators
  • Halbach array applications
  • IEC 61400 standards compliant
  • Gearless turbine technology
  • Magnetic shielding
  • Lifecycle assessment
  • Stator-rotor configurations
  • Vibration resistance
  • Demagnetization risks
  • Hybrid excitation systems
  • Energy storage integration
  • Magnetic anisotropy
  • Coercivity optimization
  • Magnet cost trends
  • Magnetic circuit design
  • Residual induction
  • Vertical-axis turbines
  • Magnet brittleness mitigation
  • Offshore corrosion challenges
  • High-temp superconductors
  • Neodymium price volatility
  • Power coefficient optimization
  • Geometric tolerances
  • Alternator cooling systems
  • Carbon footprint analysis
  • IEC 60034 standards
  • Magnet segmentation
  • Wind turbine noise reduction
  • Cryogenic treatments
  • Magnet trade policies
  • Blade pitch control
  • Magnetic permeability
  • Our Magnetized assembly jigs make it easy to place the magnets.
  • Wind forecasting algorithms
  • Hybrid diesel-wind systems
    • Performance simulation tools
  • Magnetic levitation bearings
  • Skystream 400W systems
  • Patent trends 
Welcome to our factory’s custom NdFeB magnet services, where your ideas and needs become reality.

Simply share your concepts, requirements, or design drawings, and we’ll work closely with you to produce high-quality NdFeB magnets tailored to your exact specifications and performance standards.

You’ll benefit from competitive pricing, complimentary samples, and professional technical support from our dedicated team, making the customization process worry-free, safe, and cost-effective.
Our goal is to ensure that your products achieve outstanding performance with the highest level of quality and precision.

Economic Development Zone, Industrial Park, Shehong City, Sichuan Province, China.

Contact

News

Blog

滚动至顶部

Contact Us

If you are interested in our products or have product development needs, please contact us and our team will get back to you as soon as possible! In order to better serve you, please leave the following information.

Contact Us

If you are interested in our products or have product development needs, please contact us and our team will get back to you as soon as possible! In order to better serve you, please leave the following information.

Talk to our boss

If you are interested in our products or have product development needs, please contact me, my team and I will get back to you as soon as possible! In order to better serve you, please leave the following information.

Talk to our boss

If you are interested in our products or have product development needs, please contact me, my team and I will get back to you as soon as possible! In order to better serve you, please leave the following information.